According to API SPEC 5L, conveyor steel pipe is divided into two product classes, PLSl and PLS2, for which different technical conditions are specified.
1. PSL2 is stricter than PSL1 in terms of chemical composition, tensile properties, impact work, non-destructive testing and other indicators;
2. PSL1 is not required to do impact performance, PSL2 all steel grades except x80, full-size 0 ℃ Akv average: longitudinal ≥ 41J, transverse ≥ 27J. X80 steel grades, full-size 0 ℃ Akv average: longitudinal ≥ 101J, transverse ≥ 68J; pipeline pipe should be done branch by branch hydraulic test, and the standard does not provide for the allowance of nondestructive substitution of hydraulic pressure;
3. PSL1 does not require nondestructive testing, PSL2 should be nondestructive testing branch by branch;
4. the pipe end of PSL2 must be sandblasted, while PSL1 does not need to, and other places are basically the same;
PSL-2 requirements are more stringent, from the choice of raw materials as well as testing methods, are more stringent, for the final production process also has requirements. So when ordering according to API 5L, the terms of the contract, in addition to specifying specifications, steel grade and other usual indicators, but also must indicate the level of product specification, that is, PSL1 or PSL2;






