Central heating heating pipe alignment is divided into top in and bottom out, bottom in and bottom out, bottom in and bottom out. One of the top into the bottom out of the way is divided into the opposite side and the same side of the two ways, the heating pipe way is generally based on the height of the choice, the height of the heater in the 1.5-1.8 metres or so, you need to choose the bottom into the bottom out of the way. This type of connection is suitable for large buildings or places that need to cover a wide area.
There are other different connection methods in practice. When choosing a connection method, you need to take into account factors such as the size of the building, heating requirements, spatial layout and individual needs.
Central heating seamless steel pipe pressure normal use generally between 0.2-0.35MPA. The pressure borne by the geothermal pipe (should not be greater than 0.8MPa), in order to ensure the stable and normal operation of the heating system. Centralised heating pressure normal use generally between 0.2-0.35MPa. In addition, Pe-Rt geothermal pipe pressure of 0.8MPa conditions, PE-RT pipe can be safely used for more than 50 years.






