Dec 26, 2023 Leave a message

Classification Of Drill Pipe Joints

The drill pipe joint is a component of the drill pipe, divided into male joints and female joints, connected at both ends of the drill pipe body. In order to enhance the connection strength of the joint, the wall thickness of the pipe body needs to be increased in the joint part, which can be divided into three forms according to the thickening method: internal thickening, external thickening and internal and external thickening. The joint is threaded (thick buckle) to connect each single drill pipe. The drill pipe joint thread is a cone pipe thread with a sealing shoulder. The shoulder surface is tightened to play a sealing role, and the thread only plays a connection role. Different thickening methods, the corresponding joint thread type is also different.
According to the threaded drill pipe joint is divided into four types: internal flat (IF), perforated hole (FH), regular (REG); Number (NC).
Buckle connection condition
Three conditions must be met for connection:
① the dimensions are equal;
② The type of thread is the same;
③ Male and female buckle match.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry