Heat treatment
| Grade | Hot finished seamless steel pipe | Cold finished seamless steel pipe | Hot finished electric resistance welded steel pipe | Electric resistance welded steel pipe other than hot finished |
| STPT410 | As manufactured. However, low temperature annealing or normalizing may be applied, as necessary. | Low temperature annealed or normalized. | As manufactured. However, low temperature annealing or normalizing may be applied, as necessary. |
Low temperature annealed or normalized. |
Chemical Composition of JIS G3456 STPT 410
| Grade | Chemical Composition % | ||||
| C | Si | Mn | p | S | |
| STPT 410 | 0.30 max. | 0.10~0.35 | 0.30~1.00 | 0.035 max. | 0.035 max. |
Mechanical Properties of JIS G3456 STPT 410
| Letter symbol of grade | Mechanical Properties | |||||
| Tensile strength | Yield strength | Elongation % | ||||
| kgf/m㎡ {N/ m㎡} | kgf/m㎡ {N/ m㎡} | No.11 and No.12 test pieces | No. 5 test pieces | No. 4 test piece | ||
| Longitudinal | Transverse | Longitudinal | Transverse | |||
| STPT 410 | 42{412}min | 25{245} min | 25 min | 20 min | 19 min | 24 min |
Appearance
(1)The pipe are practically straight, and its both ends shall be at a right angle to its axis.
(2) The inside and outside surfaces of the pipe shall be well-finished and free form defects that are detrimental to practical use.






