Welding is a process in which two or more homogeneous or dissimilar materials are joined together through the bonding and diffusion of atoms or molecules.
The method to promote bonding and diffusion between atoms and molecules is to apply heat or pressure, or both at the same time.
Metal welding can be divided into three categories: fusion welding, pressure welding and brazing according to the characteristics of the process.
Fusion welding is a method in which the workpiece interface is heated to a molten state during the welding process and the welding is completed without applying pressure. During welding, the heat source rapidly heats and melts the interface between the two workpieces to be welded, forming a molten pool. The molten pool moves forward with the heat source, and after cooling, a continuous weld is formed to connect the two workpieces into one body.
During the welding process, if the atmosphere is in direct contact with the high-temperature molten pool, the oxygen in the atmosphere will oxidize the metal and various alloying elements. Nitrogen, water vapor, etc. in the atmosphere enter the molten pool, and will also form defects such as pores, slag inclusions, and cracks in the weld during the subsequent cooling process, deteriorating the quality and performance of the weld.
In order to improve the welding quality of seamless steel pipes, various protection methods have been developed. For example, gas shielded arc welding uses argon, carbon dioxide and other gases to isolate the atmosphere to protect the arc and molten pool rate during welding; another example is when steel welding, ferrotitanium powder with a high affinity for oxygen is added to the electrode coating for deoxidation. It can protect beneficial elements such as manganese and silicon in the welding rod from oxidation and entering the molten pool, and obtain high-quality welds after cooling.
Pressure welding is to achieve interatomic bonding between two workpieces in a solid state under pressurized conditions, also known as solid-state welding. The commonly used pressure welding process is resistance butt welding. When current passes through the connection end of two workpieces, the temperature rises due to the large resistance. When heated to a plastic state, the connection becomes one under the action of axial pressure. The common feature of various pressure welding methods is that pressure is applied during the welding process without adding filler material. Most pressure welding methods such as diffusion welding, high frequency welding, cold pressure welding, etc. do not have a melting process, so there are no problems like burning of beneficial alloy elements and intrusion of harmful elements into the weld like fusion welding, thus simplifying the welding process and also Improved welding safety and hygiene conditions. At the same time, because the heating temperature is lower than that of fusion welding and the heating time is shorter, the heat affected zone is smaller. Many materials that are difficult to weld with fusion welding can often be welded with pressure welding to form high-quality joints with the same strength as the base metal.
Brazing is to use a metal material with a lower melting point than the workpiece as the filler metal. The workpiece and the filler metal are heated to a temperature higher than the melting point of the filler metal and lower than the melting point of the workpiece. The liquid filler metal is used to moisten the workpiece, fill the interface gap, and realize the connection with the workpiece. The mutual diffusion between atoms realizes the welding method.






