Mar 13, 2024 Leave a message

What Is The Use Of Bimetal Lined Pipe?

In composite pipe, a corrosion-resistant alloy forms a complete barrier layer on the inner surface of carbon or low-alloy steel pipe (often called "backing steel"). Generally speaking, the use of composite or bimetal lined pipes can economically use expensive CRA materials, and has received widespread attention and application abroad. Do you know what clad steel pipes are used for?


1. Casing for oil and natural gas transportation

The inner pipe is made of stainless steel materials such as Incoloy625 and Incoloy825 to ensure the corrosion resistance of the pipe. The outer pipe is usually made of ×, x50, x60, x70, A335-P22 and other materials to ensure the strength of the pipe. The American Petroleum Institute (API) has formulated standards for composite pipes for pipelines, which are numbered API 5LD: Cr-Mo steel, super 13Cr, G3, C028 and other oil well pipes and nickel-based alloy coated pipes such as 825,028.


2. Boiler

Steel pipes for superheaters should have high temperature strength under steam conditions of 650 MPa and 35 MPa, excellent surface temperature and corrosion resistance, and inner surface resistance to water vapor oxidation.

Sumitomo Metal Corporation of Japan selected SUS310S, 35Cr-55Ni, and 40Cr-55Ni as outer base tubes and 17-14CuMo and loy800has as inner tubes to develop ultra-supercritical boiler superheater cladding tubes.

Sweden's Sandvik Steel Company has successfully developed carbon steel as the inner pipe and sanmicro28 as the outer pipe, which has good corrosion resistance. The coated steel pipes produced by Sandvik do not require any changes to the boiler structural design and can be used directly.


3. Garbage incinerator

Coated steel pipes for waste incinerators. The outer tube can be made from Sanicro65 alloy, and the inner tube can be made from carbon steel or chromium-molybdenum steel, which is resistant to stress corrosion cracking. Europe and the United States have used 2 million meters of composite steel pipes since the first installation of cladded tube incinerator superheaters and water wall tubes in 1971.


4.Heat exchanger

Coated steel pipes for heat exchangers should also have good thermal conductivity and certain strength and corrosion resistance.

The cladding pipe produced by Sandvik uses high-alloy nickel-chromium alloy 800 as the inner tube and low-alloy steel ASTM A213 Ti2 as the outer tube. The cladding pipe produced by Japan NKK Company uses API 5L-16MnV steel for the outer pipe and NIC42 steel for the inner pipe.


5. Used in wear-resistant steel

The outer pipe of the coated steel pipe produced by a Japanese company is made of SUS316L corrosion-resistant steel and the inner pipe is made of Stellite No12 alloy. It is still a new product after 4 years. It has also been well used in pneumatic conveying pipelines of other micro-powder particles, and the demand is increasing.

Composite pipe

Send Inquiry

whatsapp

Phone

E-mail

Inquiry