ASTM A182 Stainless Steel Flanges
ASTM A182 stainless steel flanges are forged piping components made from high-quality alloy and stainless steel, designed for high-temperature, high-pressure, and corrosive service. Manufactured from ASTM A182 materials, these flanges are dimensionally compliant with ASME B16.5 / B16.47 standards. They are widely used in oil & gas, petrochemical, offshore, power generation, and industrial piping systems.
What is ASTM A182?
ASTM A182 specifies alloy and stainless steel forged or rolled components for piping systems under high temperature or pressure, including:
- Flanges
- Fittings
- Valves
It defines chemical composition, mechanical properties, heat treatment, and testing requirements for each grade.
Material Grades
| Grade | Description | Typical Application |
|---|---|---|
| F304 / F304L | General corrosion resistance | Oil & gas, water, chemical industry |
| F316 / F316L | Enhanced chloride resistance | Marine, offshore, chemical plants |
| F321 | Titanium stabilized, high temperature | Steam, high-temperature pipelines |
| Duplex F51 / F53 | High strength + corrosion resistance | Offshore, seawater, chemical industry |
Note: Duplex grades are used when specified for ASTM A182 flanges; not all projects require them.
Types of Flanges
We supply a full range of ASTM A182 forged stainless steel flanges:
| Type | Description |
|---|---|
| Weld Neck (WN) | High-pressure systems, strong joint |
| Slip-On (SO) | Easy installation, moderate pressure |
| Blind (BL) | Pipe end closure |
| Socket Weld (SW) | Small diameter, high-pressure piping |
| Threaded (TH) | Low-pressure, assembly without welding |
| Lap Joint (LJ) | Flange with stub end, easy dismantling |
| Ring Type Joint (RTJ) | High-pressure, oil & gas pipelines |
| Orifice / Long Weld Neck | Project-specific designs |
Size & Pressure Class
- Nominal sizes: 1/2" – 48" (DN15 – DN1200+)
- Pressure classes: Class 150 / 300 / 600 / 900 / 1500 / 2500
- Custom sizes and ratings available per project requirements
ASTM A182 Flange Selection Matrix
| Application | Recommended Grade | Pressure Class | Notes |
|---|---|---|---|
| Offshore seawater | F316L / Duplex F51 | 300–600 | High chloride, corrosion resistance |
| High-temp steam | F321 | 300–900 | Titanium stabilized |
| General oil & gas | F304 / F304L | 150–300 | Standard conditions |
| Chemical plant | F316L / F53 | 150–900 | Corrosive media |
| Water treatment | F304 / F304L | 150–300 | Mild corrosion |
This matrix helps buyers quickly select the appropriate material and class for their projects.
ASTM A182 Stainless Steel Flanges Manufacturing Process
- Raw material selection (ASTM A182 compliant)
- Forging (open die / closed die)
- Heat treatment (solution annealing / quenching)
- Rough and CNC machining
- Surface finishing
- Dimensional inspection
- Mechanical & chemical testing
ASTM A182 Flanges Quality Assurance & Testing
Mechanical & Chemical Testing
- Tensile strength, yield strength
- Hardness & impact tests
- Chemical composition verification (spectrometer)
Non-Destructive Testing (NDT)
- Penetrant Testing (PT) – standard
- Ultrasonic Testing (UT) – project-specific
- Radiographic Testing (RT) – when required
Documentation
- EN 10204 3.1 / 3.2 Mill Test Certificates (MTC)
- Heat number traceability
- Inspection & compliance reports
Surface Finish Options
- Raised Face (RF)
- Flat Face (FF)
- Ring Type Joint (RTJ)
- Serrated / custom finishes
- Protective coating or oil coating for shipment
ASTM A182 Flange in Stock
Packaging & Shipping
- Fumigated wooden crates
- Protective end caps
- Anti-rust oil coating
- Reinforced bundles for sea freight
- Global shipping support (sea, air, multimodal)
Applications
- Oil & gas pipelines
- Petrochemical plants
- Offshore platforms
- Power generation systems
- Heat exchangers
- Water treatment plants
- General industrial pressure piping
Flange Packaging and shipping
FAQ
Q1: Are ASTM A182 flanges suitable for high-pressure applications?
Yes, when used with the correct grade and pressure class, they are suitable for high-temperature and high-pressure piping systems.
Q2: What certificates are provided?
EN 10204 3.1 / 3.2 MTC with full heat number traceability.
Q3: What is the typical delivery time?
7–30 days depending on grade, size, and quantity.
Q4: What grades are best for offshore applications?
F316L and duplex F51/F53, due to high corrosion resistance.
Q5: Can custom flanges be manufactured?
Yes, non-standard dimensions, pressure ratings, and finishes are available on request.
Hot Tags: astm a182 stainless steel flanges, China astm a182 stainless steel flanges manufacturers, suppliers, factory, emergency pipe fittings, permanent pipe fittings, stationary pipe fittings, temporary pipe fittings
Previous
Slotted PipeYou Might Also Like
Send Inquiry