A672 C60 CL22 Welded Pipe
video

A672 C60 CL22 Welded Pipe

ASTM A672 C60 is the standard specification for manufacturing high-pressure welded pipe and covers various grades of steel.
Send Inquiry
Chat Now
Product Introduction

ASTM A672 is the standard specification for electric-fusion-welded (EFW) steel pipe made from pressure-vessel-quality carbon steel plate, intended for high-pressure service at atmospheric and moderate (lower) temperatures. Grade C60 designates the base metal-equivalent to ASTM A516 Grade 60 plate-with a minimum yield strength of 220 MPa and a tensile strength of 415–550 MPa. Class 22 specifies that the pipe body is normalized and the longitudinal weld is stress-relieved (or normalized), giving uniform mechanical properties across the seam. GNEE supplies A672 C60 CL22 pipe in a full range of diameters and wall thicknesses for oil & gas, refinery, petrochemical, and power applications.

Take Action Contact Us: sales@gneetube.com

 

Chemical Composition of A672 C60 (A516 Grade 60 Plate)

The chemistry follows ASTM A516 Grade 60 plate as referenced by A672; carbon limits are thickness-dependent.

Element Composition, % (max unless shown as range)
Carbon (t ≤ 12.5 mm / 0.5 in.) 0.21 max
Carbon (12.5 < t ≤ 50 mm) 0.23 max
Carbon (50 < t ≤ 100 mm) 0.25 max
Carbon (t > 100 mm) 0.27 max
Manganese 0.60–1.20*
Phosphorus 0.035 max
Sulfur 0.035 max
Silicon 0.13–0.45

 

Mechanical Properties of A672 C60 Pipe

Property Requirement
Tensile Strength 415–550 MPa
Yield Strength (minimum) 220 MPa
Elongation (200 mm gauge) 25% min (per A672 tables, thickness-dependent)

 

ASTM A672 Class Designations

The "Class" in A672 defines the post-weld heat treatment. Class 22 is the most common choice for integrity-critical pressure piping.

Class Base Metal Weld Treatment Typical Service
Class 12 As welded Stress relieved (PWHT) Low-stress, non-critical
Class 20 Normalized - Improved toughness
Class 22 Normalized Stress relieved or normalized High-integrity pressure service
Class 30 / 32 Quenched & tempered Q&T or PWHT Severe / cyclic service

 

Available Sizes & Specifications

Item Range
Outer Diameter (OD) 16 in. – 120 in. (406–3048 mm); smaller sizes on request
Wall Thickness SCH 10 through SCH 160, XXS, or custom
Length Single random, double random, or fixed up to ~18 m
Ends Plain End (PE), Beveled End (BE), or welded flanges
Testing Hydrostatic test; RT/UT of weld per specification
Dimensions standard ASME B36.10

 

ASTM A672 C60 Carbon Steel EFW Pipe

A672 C60 CL22 efw pipe

 

Applications of A672 C60 CL22 Pipe

  • Oil and gas transmission and gathering lines
  • Refinery and petrochemical process piping
  • Power-plant boiler feed and steam systems
  • Water and wastewater transmission mains
  • Other moderate-temperature, high-pressure services requiring large-diameter carbon steel pipe

A672 C60 CL22 is not intended for the high-temperature creep-range service covered by A671 alloy grades; select the grade and class to match the design temperature and pressure of your system.

 

Manufacturing Process (EFW, Not ERW)

A672 C60 CL22 pipe is produced by rolling pressure-vessel-quality plate into a cylindrical shape and joining the longitudinal seam by electric fusion welding (EFW), typically double-submerged-arc welding (DSAW) with filler metal added. This is fundamentally different from electric-resistance welding (ERW): ERW forms pipe from coiled strip using high-frequency current and squeeze rolling, whereas A672 EFW fuses plate with an arc and added filler, which is why A672 pipes are normally supplied in large diameters that ERW mills cannot reach.

After welding, the pipe receives the Class 22 heat treatment-normalizing of the base metal and stress relief (or normalizing) of the weld-to reduce residual stresses from welding and ensure consistent toughness and ductility throughout the pipe.

 

Advantages of GNEE

GNEE manufactures and supplies ASTM A672 C60 CL22 EFW welded pipe with complete testing equipment, in-house heat treatment, cutting, beveling, and surface treatment. With multiple production lines and years of export experience, we provide mill test certificates and support for custom sizes and inspection requirements. Contact us at sales@gneetube.com for quotations and technical data sheets.

 

certificate

A672 Grade C60 Class22 pipe certificate

 

FAQ

What is ASTM A672 Grade C60 Class 22 pipe?

ASTM A672 C60 CL22 is an electric-fusion-welded (EFW) carbon steel pipe. Grade C60 refers to the base metal, which is pressure-vessel-quality ASTM A516 Grade 60 plate with a minimum yield strength of 220 MPa and a tensile strength of 415–550 MPa. Class 22 means the pipe body is normalized and the longitudinal weld is stress-relieved (or normalized), giving uniform mechanical properties across the seam. It is intended for high-pressure service at atmospheric and moderate temperatures.

 

Is ASTM A672 C60 CL22 the same as ERW pipe?

No. ASTM A672 pipe is produced by electric-fusion welding (EFW), usually double-submerged-arc welding (DSAW) of pressure-vessel-quality plate with filler metal added. It is not the same as electric-resistance-welded (ERW) pipe, which is made from coiled strip using high-frequency current. EFW from plate allows A672 pipes to be supplied in very large diameters that ERW mills cannot produce.

 

What does Class 22 mean in ASTM A672?

In ASTM A672, the class defines the post-weld heat treatment. Class 22 specifies that the base metal is normalized and the weld is stress-relieved or normalized. Other common classes are Class 12 (stress-relieved weld, as-welded body), Class 20 (normalized), and Class 30/32 (quenched and tempered). Class 22 is the most widely used grade for integrity-critical pressure piping.

 

What are the chemical and mechanical properties of A672 C60?

Chemically, A672 C60 (A516 Gr.60 plate) contains carbon up to 0.21–0.27% depending on thickness, manganese 0.60–1.20% (up to 1.60% with carbon reduction), phosphorus and sulfur each 0.035% max, and silicon 0.13–0.45%. Mechanically, it offers a minimum yield strength of 220 MPa and a tensile strength of 415–550 MPa, with elongation per the A672 tables.

 

What sizes are available for A672 C60 CL22 pipe?

Because it is welded from plate, A672 C60 CL22 is typically supplied in large diameters from about 16 in. (406 mm) up to 120 in. (3048 mm), with wall thickness from SCH 10 through SCH 160, XXS, or custom. Lengths are single random, double random, or fixed up to roughly 18 m, with plain, beveled, or flanged ends. Smaller diameters can be produced on request.

 

Where is ASTM A672 C60 CL22 pipe used?

It is used in oil and gas transmission, refinery and petrochemical process piping, power-plant boiler feed and steam systems, water and wastewater lines, and other moderate-temperature high-pressure services where large-diameter carbon steel pipe is required. It is not intended for the high-temperature creep-range service covered by A671 alloy grades.

Hot Tags: a672 c60 cl22 welded pipe, China a672 c60 cl22 welded pipe manufacturers, suppliers, factory, welded pipe for smart city projects, welded pipe for office building, welded pipe for renewable energy, welded pipe for heating, welded steel pipe for hydro power, welded pipe for smart filtration

Send Inquiry

whatsapp

Phone

E-mail

Inquiry