Delivery Conditions
API 5L X42 line pipe is a high-performance pipeline for oil and gas transportation, globally deployed across the energy industry. Hot-rolled X42 steel pipe is delivered in the following conditions: normalized rolling, normalized forming, normalized, and normalized and tempered. X42 hot-rolled pipes can be produced as either seamless or welded steel pipes, with plain, threaded, or beveled ends offering flexible connection methods such as welding, coupled connections, and socket welding.
Chemical Composition
For X42 PSL1, phosphorus is 0.03 percent maximum, carbon 0.26 percent maximum, sulfur 0.03 percent maximum, and manganese 1.30 percent maximum. For X42 PSL2, phosphorus is 0.025 percent maximum, carbon 0.22 percent maximum, sulfur 0.015 percent maximum, and manganese 1.40 percent maximum. The tighter PSL2 limits improve weldability and toughness.
Mechanical Properties
X42 has a minimum yield strength of 42,000 psi, about 290 MPa, and a minimum tensile strength of 60,000 psi, about 414 MPa. PSL1 requires a minimum elongation of 28 percent, while PSL2 adds a maximum yield of 100 ksi and a maximum tensile of 72 ksi with a yield-to-tensile ratio limit of 0.93 and mandatory impact testing.
Schedule Chart
X42 pipe is available in nominal sizes from 3/4 to 12 inches with wall thicknesses defined by schedule number, from SCH 5 to SCH 160 per ASME B36.10. For example, a 6-inch pipe has an outside diameter of 6.625 inches with SCH 40 wall of 0.280 inch and SCH 80 wall of 0.562 inch.
Testing Requirements
X42 line pipe must meet stringent dimensional tolerances, with outside diameter deviation not exceeding plus or minus 0.75 percent and wall thickness tolerance within plus 15 percent and minus 12.5 percent. Throughout the manufacturing process, non-destructive testing is implemented, including ultrasonic and eddy current testing, and supplementary drop-weight tear or hardness testing is required for special environments.
Frequently Asked Questions
Q: What is the yield strength of X42?
A: 42,000 psi minimum, about 290 MPa.
Q: What is the tensile strength?
A: 60,000 psi minimum, about 414 MPa.
Q: What delivery conditions are available?
A: Normalized rolling, normalized forming, normalized, and normalized and tempered.
Q: What is the PSL2 carbon limit?
A: 0.22 percent maximum.
Q: What NDT is applied?
A: Ultrasonic and eddy current testing during manufacturing.
Q: What end types are available?
A: Plain, threaded, and beveled ends.
For API 5L X42 pipe quotations with your required PSL level and schedule, contact our sales team.





