Dec 15, 2025 Leave a message

What is the difference between API 5L X52 and A106 GR B

What is API 5L X52 material?

API 5L X52 line pipe is a high-strength seamless and welded steel pipe widely used in the oil and gas transportation field. Its performance and quality are directly related to the safety and efficiency of energy transportation. As an important material in the API 5L standard, X52 represents a controlled rolling and controlled cooling process (TMCP) steel with a minimum yield strength of 52,000 psi (approximately 358 MPa), which also has good weldability and low-temperature toughness.

 

What is the difference between API 5L X52 and A106 GR B?

‌Parameter‌ ‌API 5L X52 (PSL2)‌ ‌ASTM A106 Gr.B‌ ‌Fundamental Differences‌
‌Standard Purpose‌ Dynamic fluid transmission ‌High-temp static systems‌ A106 for boilers/reactors
‌Service Temp‌ ‌-45℃~80℃ (-49℉~176℉)‌ ‌-29℃~425℃ (-20℉~797℉)‌ ► ‌>80℃ MUST use A106‌
‌Yield Strength‌ ≥360 MPa (52.2 ksi) ≥240 MPa (35 ksi) ► 50% higher strength in X52
‌Low-Temp Toughness‌ ‌≥40J @ -20℃‌ Not required ► X52 for arctic/subsea pipelines
‌Corrosion Control‌ ‌Mandatory HIC/SSC tests‌ None ► X52 for sour service fields
‌NDT Method‌ 100% UT + ET ‌Sampling RT‌ ► Higher defect detection in X52
‌Weldability‌ CEIIW ≤0.45% ‌CEIIW ≤0.50%‌ ► Higher preheat temp for A106

 

What are the properties of API X52?

API 5L X52 Pipe Mechanical Properties

Grade Yield Strength Tensile Strength Yield to Tensile Elongation
  min. (KSI) min. (KSI) Ratio (max) %
API 5L X52 52 66 0.93 21

 

Chemical Element of API 5L Grade X52 Pipe

Grade C max Mn max P S max V max Nb max Ti max
min max
X52 0.28 1.4 - 0.03 0.03 d d d

 

What is the wall thickness of API 5L X52?

NPS
(in)
Outside Diameter
(in)
API 5L X52 Pipe Schedule
SCH 10 SCH 20 SCH 30 SCH STD SCH 40 SCH 60 SCH XS SCH 80 SCH 100 SCH 120 SCH 140 SCH 160 SCH XXS
Wall Thickness (in)
1/8 0.405       0.068 0.068   0.095 0.095          
1/4 0.540       0.088 0.088   0.119 0.119          
3/8 0.675       0.091 0.091   0.126 0.126          
1/2 0.840       0.109 0.109   0.147 0.147       0.187 0.294
3/4 1.050       0.113 0.113   0.154 0.154       0.219 0.308
1 1.315       0.133 0.133   0.179 0.179       0.250 0.358
1 1/4 1.660       0.140 0.140   0.191 0.191       0.250 0.382
1 1/2 1.900       0.145 0.145   0.200 0.200       0.281 0.400
2 2.375       0.154 0.154   0.218 0.218       0.344 0.436
2 1/2 2.875       0.203 0.203   0.276 0.276       0.375 0.552
3 3.500       0.216 0.216   0.300 0.300       0.438 0.600
3 1/2 4.000       0.226 0.226   0.318 0.318          
4 4.500       0.237 0.237   0.337 0.337   0.438   0.531 0.674
5 5.563       0.258 0.258   0.375 0.375   0.500   0.625 0.750
6 6.625       0.280 0.280   0.432 0.432   0.562   0.719 0.864
8 8.625   0.250 0.277 0.322 0.322 0.406 0.500 0.500 0.594 0.719 0.812 0.906 0.875
10 10.750   0.250 0.307 0.365 0.365 0.500 0.500 0.594 0.719 0.844 1.000 1.125 1.000
12 12.750   0.250 0.330 0.375 0.406 0.562 0.500 0.688 0.844 1.000 1.125 1.312 1.000
14 14.000 0.250 0.312 0.375 0.375 0.438 0.594 0.500 0.750 0.938 1.094 1.250 1.406  
16 16.000 0.250 0.312 0.375 0.375 0.500 0.656 0.500 0.844 1.031 1.219 1.438 1.594  
18 18.000 0.250 0.312 0.438 0.375 0.562 0.750 0.500 0.938 1.156 1.375 1.562 1.781  
20 20.000 0.250 0.375 0.500 0.375 0.594 0.812 0.500 1.031 1.281 1.500 1.750 1.969  
22 22.000 0.250 0.375 0.500 0.375   0.875 0.500 1.125 1.375 1.625 1.875 2.125  
24 24.000 0.250 0.375 0.562 0.375 0.688 0.969 0.500 1.219 1.531 1.812 2.062 2.344  
30 30.000 0.312 0.500 0.625 0.375     0.500            
32 32.000 0.312 0.500 0.625 0.375 0.688                
34 34.000 0.312 0.500 0.625 0.375 0.688                
36 36.000 0.312 0.500 0.625 0.375 0.750                
42 42.000   0.500 0.625 0.375 0.750        

 

API 5L X52 PSL1 PSL2 line pipe factory

API 5L X52 PSL1 PSL2 pipe factory

Contact now

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry