Mar 26, 2024 Leave a message

ASTM A106 Pipe Grades A, B & C: Properties, Chemistry & Selection

ASTM A106 Pipe: The Three Grades of High-Temperature Seamless Pipe

ASTM A106 covers seamless carbon steel pipe for high-temperature service - boilers, refineries, heat exchangers, and power plants. A106 is produced only as a seamless product, which gives it the integrity needed for pressure service, and it is offered in three strength grades: A, B, and C.

1. Chemical Composition

All three grades are plain carbon steels with closely controlled residuals. Residual elements (Cr, Cu, Ni, Mo, V) are each limited to 0.40% max (0.08% for V) in A106, keeping the steel clean and weldable. Carbon content rises slightly with grade - Grade C carries a higher carbon maximum than Grade A - which is what drives its higher strength.

2. Mechanical Properties

Grade Tensile Strength min (MPa / ksi) Yield Strength min (MPa / ksi)
A 330 / 48 205 / 30
B 415 / 60 240 / 35
C 485 / 70 275 / 40

3. How to Select the Grade

Grade A is the least common, used where maximum weldability and formability matter. Grade B is the industry workhorse - roughly 90% of A106 consumption - balancing strength, weldability, and cost for refinery, boiler, and process piping. Grade C is specified where higher design pressure or thinner walls justify the extra cost, and it remains fully weldable with standard carbon-steel procedures.

4. Temperature and Testing Considerations

A106 serves continuous service typically up to about 425°C (800°F), with design de-rating per ASME B31.3 above that. Impact testing is not required by default; for low-temperature or critical service, supplementary requirements such as S5 (Charpy impact testing) can be specified. A106 Gr. B pipe that also meets A53 Gr. B requirements can be dual-certified to both standards, which simplifies stocking and procurement.

Frequently Asked Questions

How many grades does ASTM A106 have?
Three - A, B, and C - all seamless; there are no welded types in A106.

Which A106 grade is most widely used?
Grade B is the workhorse, with 415 MPa tensile and 240 MPa yield, used across refineries, boilers, and process plants.

What is the difference between A106 and A53?
A106 is seamless only and intended for high-temperature service; A53 covers seamless and welded pipe for general (including low-temperature) service.

Is A106 Gr. B dual-certifiable?
Yes - A106 Gr. B pipe that also meets A53 Gr. B requirements can be shipped with dual certification to both standards.

What temperature range does A106 serve?
Typically up to about 425°C (800°F) for continuous service, with design de-rating per ASME B31.3 above that.

Does A106 require impact testing?
Not by default; for low-temperature or critical service, supplementary requirements such as S5 (Charpy impact testing) can be specified.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry