What Is a Two-Piece Ball Valve
A two piece ball valve is a quarter turn valve whose body is made from two parts: a main body that houses the ball, the seats and the stem, and a secondary body that closes the assembly. The two parts are joined by threads or by bolts, and the joint is sealed with a gasket or an O-ring. Splitting the body makes assembly easier and allows the internals to be inspected or replaced without cutting the line.
Working Principle
Turning the lever or the stem through 90 degrees rotates the ball between its seats. When the bore of the ball lines up with the pipeline the valve is open; after a quarter turn the bore faces across the pipe and the seat rings seal against the ball. Most two piece ball valves use a floating ball, so line pressure pushes the ball against the downstream seat and the sealing force increases as pressure rises.
Typical Specifications
| Parameter | Typical range or reference |
|---|---|
| Nominal size | NPS 1/4 to NPS 8, with larger bodies made to order |
| Pressure class | Class 150 to Class 1500 |
| Bore | Full bore and reduced bore |
| Body material | ASTM A216 WCB, ASTM A105, ASTM A351 CF8 and CF8M |
| Seat and seals | Polytetrafluoroethylene, reinforced grades, graphite for higher temperature duty |
| End connections | Threaded to ASME B1.20.1, socket weld, ASME B16.5 flanged, butt weld |
| Design reference | API 6D, ISO 17292, ASME B16.34 |
| Testing | Shell and seat tests to API 598 |
Structural Features
Compact, light body, which reduces space demand and transport cost.
Straight through bore with low flow resistance and small pressure loss.
Elastic seat design with reliable sealing at the ball and at the stem.
Quick quarter turn operation, available with lever, worm gear, pneumatic or electric actuation.
Simple maintenance, because the secondary body can be removed to renew seats and seals.
Applications
Two piece ball valves are widely used in petroleum, chemical, pharmaceutical, food and wastewater pipelines as on-off isolation valves. They also serve compressed air systems, heating and cooling circuits and general industrial utility lines where tight shut off and frequent operation are both required.
Selection, Installation and Maintenance
Confirm the medium, the design pressure and the design temperature before choosing a seat material, since the sealing polymer sets the practical temperature limit and the resistance to swelling in aggressive fluids. Install the valve so that the stem can be turned through its full quarter turn, and avoid using the valve as a throttling device: partial opening of a soft seated ball erodes the seat and shortens service life. When the line is depressurised, the secondary body can be opened for inspection, and gaskets and seats should be renewed before the body is closed again to the specified bolt torque.
FAQ
Q: What does the two piece construction allow?
The valve can be assembled with the ball, seats and stem already in position, and the body can be opened later for maintenance without dismantling the whole pipeline.
Q: Is a two piece ball valve a floating ball design?
Most two piece ball valves are floating ball valves, which suits small and medium sizes. Larger sizes and higher pressure classes normally use a trunnion mounted design.
Q: Which standard covers two piece ball valves?
API 6D and ISO 17292 define industrial ball valve requirements, ASME B16.34 gives pressure and temperature ratings, and API 598 gives the pressure test procedure.
Q: What temperature can a polytetrafluoroethylene seat withstand?
Standard polytetrafluoroethylene seats are limited by the polymer temperature rating, and reinforced grades or graphite seats extend the acceptable range for higher temperature duty.
Q: Can the valve be used for throttling?
Partial opening of a soft seated ball valve exposes the seat to high velocity flow and erosion, so flow regulation is better handled by a globe or control valve.
Q: How is the body joint sealed?
The joint between the main and secondary body is sealed with a gasket or an O-ring, selected for the medium and the design temperature.





