Dec 15, 2025 Leave a message

What is X52 material equivalent to

What is API 5L X52 material?

X52 oil pipeline pipe is an industrial pipe made of carbon steel, produced using a hot-rolling process. It is primarily used for transporting gas, water, and oil in the oil and natural gas industries. Its standards include GB/T9711.1 and API SPEC 5L. Common specifications include diameters of 34-3500mm and wall thicknesses of 3.0-60mm. Connection methods include welding, coupling, and socket joints.

 

What is X52 material equivalent to?

API 5L's X52 corresponds to the L360 level, with a minimum yield strength of 360 MPa.

 

What is the wall thickness of API 5L X52?

NPS
(in)
Outside Diameter
(in)
API 5L X52 Pipe Schedule
SCH 10 SCH 20 SCH 30 SCH STD SCH 40 SCH 60 SCH XS SCH 80 SCH 100 SCH 120 SCH 140 SCH 160 SCH XXS
Wall Thickness (in)
1/8 0.405       0.068 0.068   0.095 0.095          
1/4 0.540       0.088 0.088   0.119 0.119          
3/8 0.675       0.091 0.091   0.126 0.126          
1/2 0.840       0.109 0.109   0.147 0.147       0.187 0.294
3/4 1.050       0.113 0.113   0.154 0.154       0.219 0.308
1 1.315       0.133 0.133   0.179 0.179       0.250 0.358
1 1/4 1.660       0.140 0.140   0.191 0.191       0.250 0.382
1 1/2 1.900       0.145 0.145   0.200 0.200       0.281 0.400
2 2.375       0.154 0.154   0.218 0.218       0.344 0.436
2 1/2 2.875       0.203 0.203   0.276 0.276       0.375 0.552
3 3.500       0.216 0.216   0.300 0.300       0.438 0.600
3 1/2 4.000       0.226 0.226   0.318 0.318          
4 4.500       0.237 0.237   0.337 0.337   0.438   0.531 0.674
5 5.563       0.258 0.258   0.375 0.375   0.500   0.625 0.750
6 6.625       0.280 0.280   0.432 0.432   0.562   0.719 0.864
8 8.625   0.250 0.277 0.322 0.322 0.406 0.500 0.500 0.594 0.719 0.812 0.906 0.875
10 10.750   0.250 0.307 0.365 0.365 0.500 0.500 0.594 0.719 0.844 1.000 1.125 1.000
12 12.750   0.250 0.330 0.375 0.406 0.562 0.500 0.688 0.844 1.000 1.125 1.312 1.000
14 14.000 0.250 0.312 0.375 0.375 0.438 0.594 0.500 0.750 0.938 1.094 1.250 1.406  
16 16.000 0.250 0.312 0.375 0.375 0.500 0.656 0.500 0.844 1.031 1.219 1.438 1.594  
18 18.000 0.250 0.312 0.438 0.375 0.562 0.750 0.500 0.938 1.156 1.375 1.562 1.781  
20 20.000 0.250 0.375 0.500 0.375 0.594 0.812 0.500 1.031 1.281 1.500 1.750 1.969  
22 22.000 0.250 0.375 0.500 0.375   0.875 0.500 1.125 1.375 1.625 1.875 2.125  
24 24.000 0.250 0.375 0.562 0.375 0.688 0.969 0.500 1.219 1.531 1.812 2.062 2.344  
30 30.000 0.312 0.500 0.625 0.375     0.500            
32 32.000 0.312 0.500 0.625 0.375 0.688                
34 34.000 0.312 0.500 0.625 0.375 0.688                
36 36.000 0.312 0.500 0.625 0.375 0.750                
42 42.000   0.500 0.625 0.375 0.750                

 

What is the difference between API 5L X42 and API 5L X52?

‌Parameter‌ ‌X42 (L290)‌ ‌X52 (L360)‌ ‌Impact of Differences‌
‌Min. Yield Strength‌ 290 MPa (42,000 psi) ‌360 MPa (52,200 psi)‌ ▲ 24% higher pressure capacity for X52
‌Tensile Strength Range‌ 415-565 MPa ‌460-760 MPa‌ ▲ Better high-pressure resistance for X52
‌C.Eq (CEIIW)‌ ≤0.43% ‌≤0.45%‌ △ Higher preheat temp required for X52 welding
‌Typical Wall Thickness (24")‌ 12.7 mm ‌10.3 mm‌ ▼ 18% weight reduction for X52 at same pressure
‌CVN at 0°C (PSL2)‌ ≥41 J ‌≥45 J‌ ▲ Tougher low-temp requirement for X52
‌Max. Operating Pressure‌ ≤7.5 MPa ‌≤10.3 MPa‌ ▲ X52 for higher-pressure systems
‌Cost per Ton Difference‌ Base ‌+15%~20%‌ ▼ X42 more cost-effective

 

What is the pressure rating of X52?

Grade X52 indicates 52000 PSI minimum yield strength and 66000 PSI minimum ultimate tensile strength.

API 5L-PSL 1 Mechanical Properties
Grade Yield Strength Mpa Tensile Strength Mpa Elongation
X52 360 460 c

 

API 5L-PSL 2 Mechanical Properties
Grade Yield Strength Mpa Tensile Strength Mpa Raito Elongation
  min max min max max min
X52N 360 530 460 760 0.93 f

 

API 5L X52 line pipe factory 

API 5L X52 carbon steel pipe factory

Contact us for API 5L X52 pipeline for oil and gas

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry