Mar 12, 2025 Leave a message

X80 pipeline steel pipe

X80 pipeline steel implementation standards and welding performance

 

1. Introduction to X80 steel plate

X80 pipeline steel is the designation in the API Spec 5L Pipeline Steel Specification of the American Petroleum Institute. X stands for pipeline steel in the API Spec 5L standard, 80 is the strength level, and its unit is kpsi. X80 represents pipeline steel with a minimum yield strength of 80kpsi, which is approximately equal to 552MPa when converted into metric units.

2. Yield strength of X80 steel plate

The first two digits of the minimum yield strength of X80 pipeline steel in American units are X80, which means the minimum yield strength of pipeline steel is 80000psi (552MPa).

3. Main properties of X80 steel plate

X80 pipeline steel has high strength, high toughness, good weldability, certain resistance to HIC and SSC, and improving the pipeline steel grade can save construction costs.

4. Implementation standards for X80 and L555 pipeline steel: API SPEC 5L-2012 standard, GB national standard, and special standards for various projects.

5. Delivery status of X80 pipeline steel: mainly supplied in hot-rolled or normalized state.

6. Chemical element analysis of X80 steel plate

Early pipeline steel has always used ordinary carbon steel of C, Mn, Si type, focusing on performance in metallurgy, and there is no strict regulation on chemical composition. Since the 1960s, with the increase of oil and gas pipeline transmission pressure and pipe diameter, low alloy high strength steel (HSLA) has been used, mainly supplied in hot-rolled and normalized state.

7. X80 steel chemical composition

Grade C Si Mn P S V+Nb+Ti
X80,L555 ≤0.12 ≤0.45 ≤1.85 ≤0.025 ≤0.015 ≤0.15

 

API 5L X80 line pipe for oil

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry