Jan 04, 2024 Leave a message

Classification Of API 5CT Oil Casing Pipe

The classification of API 5CT oil casing is mainly based on the size, steel grade and thread specifications of the casing.
Shell size:
Nominal Outside Diameter (OD): Bushings are classified according to their nominal outside diameter, usually measured in inches. Common sizes include 4.5 inches, 5 inches, 5.5 inches, 6.625 inches, 7 inches, 9.625 inches, etc.
Steel grade:
API 5CT specifies different petroleum casing steel grades, which are represented by letters (such as H40, J55, K55, N80, L80, C90, T95, P110, Q125). Each grade has specific mechanical properties, including yield strength and tensile strength, to meet the requirements of different well conditions.
Surface finish:
The surface finish of the enclosure can also be specified, including options such as exterior bare, exterior coated, or exterior coated and interior coated. Thread type:
The ends of the casing are threaded to facilitate connection between the various parts of the casing. Thread specifications include parameters such as pitch, crest diameter, and taper. Common thread types include API NUE (non-reinforced end) and API EUE (external re-enforced end).
Connection Type:
According to the different thread and coupling specifications, API 5CT oil casing can be divided into various connection forms such as short round thread casing (STC), long round thread casing (LTC), partial trapezoidal thread casing (BTC), etc. The choice of connection type depends on factors such as well design and casing string requirements.
other requirements:
Depending on well conditions and specific applications, additional requirements may be specified, such as impact testing, nondestructive testing, and special inspection procedures.

api 5ct casing

API 5ct line pipes

Send Inquiry

whatsapp

Phone

E-mail

Inquiry