API 5CT N80 Casing Pipes
Product Information
API 5CT N80 casing is a type of steel pipe mainly used in oil well drilling to support the wellbore during and after drilling, so as to ensure the smooth operation of the oil well and extend the overall service life after well completion. API 5CT N80 oilfield casing pipes are divided into two types: N80-1 and N80-Q. Both grades feature identical chemical composition and mechanical properties, with the only difference lying in their heat treatment processes.During heat treatment, N80-1 steel undergoes normalizing and tempering, while N80Q steel undergoes quenching and tempering. Therefore, N80Q steel has higher compressive strength and internal pressure strength than N80-1 steel. Designers should clearly specify whether N80-1 or N80Q steel is being selected for the shell.
We supply full range of API 5CT OCTG pipes with strict quality control and stable delivery. Welcome your inquiry and long-term cooperation.
API 5CT N80 Casing Pipes: Short Answer
Short answer: API 5CT N80 casing is a seamless carbon steel casing with a minimum yield strength of 80,000 psi (552 MPa), supplied as N80-1 (normalized) or N80Q (quenched and tempered). Standard outside diameters run from 4-1/2 in to 20 in, with STC, LTC, BTC or premium connections, in PSL1 or PSL2. N80 is a non-sour grade: for H2S service the order switches to L80, C90 or T95.
On this page: size and weight chart, N80-1 versus N80Q selection, chemical and mechanical limits, PSL1 / PSL2 differences, FOB price range, inspection documents and delivery times. Every figure below is a reference value for enquiry only - the mill certificate governs delivery.
Editor's note on the data in this page
The text below speaks of N80Q having higher "compressive strength". For pipe the measurable quantities are collapse resistance and internal yield pressure. Quenching and tempering gives a more uniform structure, so N80Q delivers higher and more consistent collapse and burst ratings than normalized N80-1 at the same wall thickness.
The chemical table is a typical mill control range. API 5CT does not fix C, Si, Mn or V for Group 1 grade N80 - it fixes phosphorus and sulphur by product specification level (PSL1: P ≤ 0.030%, S ≤ 0.030%; PSL2: P ≤ 0.020%, S ≤ 0.010%). Read the actual heat analysis from the mill certificate.
Brinell ≤ 241 HB and the -20 °C / 34 J impact figure are order specifications, not API 5CT limits for N80. 241 HB corresponds to the 23 HRC ceiling API 5CT applies to L80. Both can be agreed in the purchase order and certified.
In the connection table, EU, NU and PL are end finishes for tubing and line pipe (PL = plain end). They are not casing connections - casing is ordered STC, LTC, BTC or with a premium connection.
API 5CT N80 Casing Pipe chemical composition
| element | N80-1 / N80-Q Requirements |
| C | 0.34~0.38% |
| Si | 0.20~0.35% |
| Mn | 1.45~1.70% |
| P | ≤0.020% |
| S | ≤0.015% |
| V | 0.11~0.16% |
| Cr / Ni / Cu / Mo | ≤0.20% |
| Al | ≤0.020% |
API 5CT N80 oil well casing steel pipe Mechanical properties
| Performance indicators | Required value |
| Minimum yield strength | 552~758 MPa |
| tensile strength | ≥689 MPa |
| elongation | ≥18% |
| Brinell hardness | ≤241 HB |
| Impact toughness | Lateral -20℃ ≥34J (N80-Q requires higher performance) |
| hydrostatic test | Calculated using the formula p=(2·f·YSmin·t)/D, no leakage is observed after holding the pressure for ≥5 seconds. |
API 5CT N80 OCTG Casing Specifications and dimensions
| parameter | scope |
| outer diameter | 114.3 mm ~ 508 mm(4.5"~20") |
| Wall thickness | 5.21 mm ~ 16.13 mm |
| length | R-1: 4.88~7.62m / R-2: 7.62~10.36m / R-3: ≥10.36m |
| outer diameter tolerance | <114.3mm:±0.79mm;≥114.3mm:+1.0%/-0.5% |
| Wall thickness deviation | 0 ~ -12.5% |
| Single piece weight deviation | +6.5% / -3.5% |
| curvature | ≤0.2%L,end1.5m≤3.18mm |
API 5CT N80 Casing Size and Weight Chart
The table lists the weights that are ordered most often in N80. Wall thickness and inside diameter are taken from the API 5CT / ISO 11960 dimensional tables; drift diameter, collapse resistance and internal yield pressure are calculated from the same wall and will be confirmed on the quotation for the exact weight you specify.
| Outside diameter | Weight (lb/ft) | Wall (mm / in) | Inside diameter (mm / in) | Standard connections | Product specification level |
|---|---|---|---|---|---|
| 4-1/2 in (114.30) | 11.60 | 6.35 / 0.250 | 101.60 / 4.000 | STC, LTC, BTC | PSL1, PSL2 |
| 4-1/2 in (114.30) | 13.50 | 7.37 / 0.290 | 99.56 / 3.920 | LTC, BTC, premium | PSL1, PSL2 |
| 5-1/2 in (139.70) | 15.50 | 6.98 / 0.275 | 125.73 / 4.950 | STC, LTC, BTC | PSL1, PSL2 |
| 5-1/2 in (139.70) | 17.00 | 7.72 / 0.304 | 124.26 / 4.892 | LTC, BTC, premium | PSL1, PSL2 |
| 5-1/2 in (139.70) | 20.00 | 9.17 / 0.361 | 121.36 / 4.778 | LTC, BTC, premium | PSL1, PSL2 |
| 5-1/2 in (139.70) | 23.00 | 10.54 / 0.415 | 118.62 / 4.670 | LTC, BTC, premium | PSL2 |
| 7 in (177.80) | 23.00 | 8.05 / 0.317 | 161.70 / 6.366 | LTC, BTC | PSL1, PSL2 |
| 7 in (177.80) | 26.00 | 9.19 / 0.362 | 159.41 / 6.276 | LTC, BTC, premium | PSL1, PSL2 |
| 7 in (177.80) | 29.00 | 10.36 / 0.408 | 157.07 / 6.184 | LTC, BTC, premium | PSL1, PSL2 |
| 7 in (177.80) | 32.00 | 11.51 / 0.453 | 154.79 / 6.094 | BTC, premium | PSL2 |
| 9-5/8 in (244.48) | 36.00 | 8.94 / 0.352 | 226.60 / 8.921 | LTC, BTC | PSL1, PSL2 |
| 9-5/8 in (244.48) | 40.00 | 10.03 / 0.395 | 224.41 / 8.835 | LTC, BTC, premium | PSL1, PSL2 |
| 9-5/8 in (244.48) | 43.50 | 11.05 / 0.435 | 222.38 / 8.755 | BTC, premium | PSL2 |
| 9-5/8 in (244.48) | 47.00 | 11.99 / 0.472 | 220.50 / 8.681 | BTC, premium | PSL2 |
| 13-3/8 in (339.72) | 54.50 | 9.65 / 0.380 | 320.42 / 12.615 | STC, BTC | PSL1, PSL2 |
| 13-3/8 in (339.72) | 61.00 | 10.92 / 0.430 | 317.88 / 12.515 | BTC, premium | PSL2 |
| 13-3/8 in (339.72) | 68.00 | 12.19 / 0.480 | 315.34 / 12.415 | BTC, premium | PSL2 |
Three rules apply to every order:
Wall tolerance is 0 to -12.5% of nominal; single-joint weight tolerance is +6.5% / -3.5%.
Length ranges are R-1 (4.88-7.62 m), R-2 (7.62-10.36 m) and R-3 (10.36 m and longer). Mixed ranges are supplied only when stated on the order.
Heavier wall in the same outside diameter raises collapse resistance but reduces drift. If the completion string has to pass a tool of a fixed size, choose the weight first and check drift second.
A weight that is not listed here - 8-5/8 in, 10-3/4 in, 16 in, 18-5/8 in, 20 in, or an intermediate wall - is normally available to order with a longer lead time.
PSL1 and PSL2: What Changes on the Order
Product specification level is written on every casing order and is the first thing a mill asks after grade and size. It changes chemistry limits, testing and documentation - not the grade itself.
| Requirement | PSL1 | PSL2 |
|---|---|---|
| Phosphorus, max. | 0.030% | 0.020% |
| Sulphur, max. | 0.030% | 0.010% |
| Charpy impact test | Not required | Mandatory, results reported |
| Non-destructive examination | Hydrostatic, visual, dimensional | Above plus additional NDE and traceability |
| Certification | Inspection certificate to API 5CT | Full traceability, EN 10204 3.1 certificate |
| Price effect | Baseline | About 2-4% higher |
For a domestic distributor order PSL1 is usually sufficient. For an operator, an EPC package or any well with a formal QA dossier, PSL2 is the default because the impact results and the traceability chain are part of the deliverable.
API 5CT N80 oilfiled casing pipes End connection type
| Buckle type | Thread type | Sealing | Applicable Scenarios |
| STC | Short round thread | Ordinary | conventional wells and shallow wells |
| LTC | Long round thread | Good | Medium to deep wells, requiring good sealing |
| BTC | Offset trapezoidal thread | Excellent | High-pressure gas wells, deep wells, offshore platforms |
| EU/NU/PL | oil pipe end | - | Pipeline products |
Differences between API 5CT N80-1 and N80Q
Heat Treatment Process (Core Difference)
N80-1: Adopts normalizing + tempering (N&T) process. The pipe is heated, air-cooled, normalized, and then tempered to stabilize its basic mechanical properties. This is a common low-cost heat treatment method for conventional oilfield pipes.
N80Q: Forced to use quenching and tempering (Q&T) process. The pipe is quenched as a whole and then tempered at high temperature. The "Q" in the grade designation represents the quenching process, which is the most fundamental technical difference between it and N80-1.
N80-1 and N80Q at a Glance
The two types share the same chemistry and the same minimum mechanical values - what differs is the heat treatment and therefore the toughness and the consistency of the collapse and burst ratings. The table condenses the comparison into the fields that appear on a purchase order.
| Property | N80-1 | N80Q |
|---|---|---|
| Heat treatment | Normalized (normalizing; tempering optional) | Quenched and tempered (mandatory) |
| Minimum yield strength | 80,000-110,000 psi (552-758 MPa) | 80,000-110,000 psi (552-758 MPa) |
| Minimum tensile strength | 100,000 psi (689 MPa) | 100,000 psi (689 MPa) |
| Charpy impact test | Not required by API 5CT | Required, batch verified |
| Structure and toughness | Ferrite-pearlite, toughness depends on chemistry | Tempered martensite, uniform and predictable |
| Collapse / burst consistency | Scatters more joint to joint | Tighter scatter, higher usable rating |
| Colour band | One red band | One red band plus one green band |
| Typical service | Shallow and medium wells, stable pressure, non-sour | Medium to deep wells, high pressure, fatigue or mild sour duty |
| Relative cost | Baseline | About 3-6% higher |
When the well is straight, pressures are moderate and no impact requirement is written into the specification, N80-1 is the lower-cost choice. When the string will be run in a deviated hole, will see pressure cycling, or the operator simply wants a certified impact value on every heat, N80Q is the correct call - the price difference is small against the cost of a failed joint.
N80 Against J55, K55, L80 and P110
N80 sits in the middle of the API 5CT carbon grade range: stronger than J55 and K55, cheaper and more forgiving than P110, and without the sour-service qualification that L80 carries.
| Grade | Yield strength ksi (MPa) | Tensile, min. ksi (MPa) | Heat treatment | Sour service | Typical section |
|---|---|---|---|---|---|
| J55 | 55-80 (379-552) | 75 (517) | As-rolled or normalized | No | Surface and shallow intermediate casing |
| K55 | 55-80 (379-552) | 95 (655) | As-rolled | No | Surface casing, conductor |
| N80-1 | 80-110 (552-758) | 100 (689) | Normalized | No | Intermediate and production casing, medium depth |
| N80Q | 80-110 (552-758) | 100 (689) | Quenched and tempered | No (assess for trace H2S) | Production casing, high pressure, fatigue duty |
| L80-1 | 80-95 (552-655) | 95 (655) | Quenched and tempered | Yes, per NACE MR0175 | Sour production casing and tubing |
| P110 | 110-140 (758-965) | 125 (862) | Quenched and tempered | No | Deep and ultra-deep wells, high pressure |
The usual substitution question is N80 against L80. L80 is capped at 95 ksi yield and 23 HRC so that it survives H2S; N80 has no hardness ceiling and no sour qualification. If the well analysis shows H2S, N80 is the wrong grade regardless of price.
Toughness and Impact Performance
API 5CT N80 Casing Pipe Price Range
Indicative FOB China ranges for N80-1 and N80Q, PSL2, R-2 lengths, plain end or standard coupling, 20 t minimum per size. Prices move with coil cost, so treat the table as a budget figure and ask for a quotation against your exact specification.
| Size and weight | Connection | FOB USD per metric ton |
|---|---|---|
| 4-1/2 in, 11.60-13.50 lb/ft | STC / LTC / BTC | 950-1,050 |
| 5-1/2 in, 15.50-17.00 lb/ft | STC / LTC / BTC | 990-1,090 |
| 5-1/2 in, 20.00-23.00 lb/ft | LTC / BTC | 1,030-1,140 |
| 7 in, 23.00-29.00 lb/ft | LTC / BTC | 1,060-1,190 |
| 7 in, 32.00 lb/ft | BTC | 1,120-1,230 |
| 9-5/8 in, 36.00-47.00 lb/ft | LTC / BTC | 1,130-1,260 |
| 13-3/8 in, 54.50-68.00 lb/ft | STC / BTC | 1,200-1,300 |
Price basis: N80Q or N80-1, PSL2, black varnished, thread protected, bundled. Add about 3-5% for BTC threading on sizes normally supplied LTC, 2-4% for PSL2 over PSL1, and 15-25% for a premium connection. Prices are indicative and are not an offer.
Application Scenarios
N80-1: Applied to shallow and medium-depth conventional wells with stable pressure, non-sour and non-alternating load conditions, serving as cost-effective general-purpose OCTG pipes.
N80Q: Suitable for medium-deep high-pressure wells, fatigue load wells, and mild sour service wells that require high toughness and high structural reliability.
API Standard Color Marking
N80-1:Single bright red band marking.
N80Q:Composite marking of one bright red band plus one green band, which is visually distinguishable for field identification.
Delivery Time by Specification
| Size and specification | Route | Lead time from order |
|---|---|---|
| 5-1/2 in 17.00 / 7 in 23.00, 26.00 / 9-5/8 in 36.00, 40.00 | In stock or rolling | 7-15 days |
| Other standard weights, PSL1 | Production | 15-25 days |
| PSL2 with impact testing on every heat | Production plus testing | 20-30 days |
| BTC threading and coupling make-up | Additional operation | Add 5-7 days |
| 13-3/8 in and larger, or non-standard wall | Production | 25-35 days |
| Premium connection (threaded and inspected) | Production plus licensed threading | 30-45 days |
Lead time is counted from receipt of the down payment and confirmation of the mill certificate draft. For project cargo we will confirm the vessel schedule before the order is placed, because the shipping window rather than the mill is usually the constraint on large casing packages.
Inspection and Documents Supplied with Every Order
The list below is the standard programme. Items 4, 5 and 11 are the ones that are most often added to a plain API 5CT order, and they are the ones that change the price.
| No. | Test | Scope |
|---|---|---|
| 1 | Heat analysis | Spectrometer on each heat, reported as C, Mn, Si, P, S and residuals |
| 2 | Product analysis | Check analysis on the finished pipe when requested |
| 3 | Tensile test | Yield strength, tensile strength and elongation per heat |
| 4 | Hardness survey | Brinell or Rockwell, when a ceiling is written into the order |
| 5 | Charpy V-notch | Mandatory for N80Q and for any PSL2 order, test temperature as agreed |
| 6 | Hydrostatic test | Per API 5CT formula, held at least 5 seconds, no leakage |
| 7 | Drift test | Drift mandrel through the full length of every joint |
| 8 | Dimensional check | Outside diameter, wall, length, straightness, weight |
| 9 | Thread inspection | Gauge check on pin and box, coupling make-up torque |
| 10 | Visual and surface | No seams, laps, cracks or handling damage |
| 11 | Non-destructive examination | UT or EMI on request, mandatory items per PSL2 |
| 12 | Documentation | Mill certificate EN 10204 3.1, packing list, third-party inspection on request |
Third-party inspection by SGS, BV, Intertek or the operator's own inspector can be arranged at the mill before shipment. Please tell us the inspection company and the notice period when you place the order, because witness testing has to be scheduled with production.
Packing, Marking and Shipment

Bundling: hexagonal bundles secured with steel strips, bundle weight and dimensions agreed per shipping plan.
Thread protection: plastic or steel protectors on pin and box, thread compound applied before make-up.
Marking: grade, type, size, weight, heat number, length and API 5CT monogram stencilled on each joint, with the bundle tag matching the mill certificate.
Loading: about 20-25 t per 20 ft container for casing up to 9-5/8 in; larger diameters ship break-bulk or in 40 ft frames depending on length.
Documents: invoice, packing list, mill certificate, certificate of origin and, where required, fumigation-free declaration for wooden dunnage.
How to Order API 5CT N80 Casing Pipes
Send the six items below and we will return a quotation with the mill certificate draft, the calculated collapse and burst values for the chosen wall, and a delivery date:
Grade and type - N80-1 or N80Q
Outside diameter and weight, for example 5-1/2 in 17.00 lb/ft
Length range - R-1, R-2 or R-3
Connection - STC, LTC, BTC, or the premium connection designation
Product specification level - PSL1 or PSL2, plus any impact test temperature
Quantity, destination port and required date
Enquiry: send your specification or write to pipes@gneetube.com. We reply with a technical quotation, not a catalogue page.
API 5CT N80 casing pipe certifications

API 5CT N80 OCTG casing test and inspection


FAQ
1.What are the application fields of API 5CT N80 products?
API 5CT N80 oil casing is widely used in the exploration and development projects of onshore conventional oilfields and gasfields. It can be used as surface casing, intermediate casing and production casing, suitable for drilling scenarios such as medium and shallow oil and gas wells, coalbed methane wells and shale gas well.
2.How is the corrosion resistance of API 5CT N80 products?
API 5CT N80 is a common carbon alloy casing steel grade without special formula for sulfide resistance or carbon dioxide corrosion resistance. It has decent basic resistance to atmospheric corrosion and ordinary formation fresh water corrosion, and can be used in neutral and fresh water formation conditions without hydrogen sulfide and high concentration CO₂.
3.What is the difference between API 5CT N80 and L80?
API 5CT L80 is specially designed for sour service with excellent sulfide stress corrosion resistance, while API 5CT N80 is a conventional carbon steel grade without anti-sulfur performance; N80 is more cost-effective for ordinary non-acidic wells, and L80 is preferred for high-sulfur and corrosive well conditions.
4.What sizes and weights of N80 casing can you supply?
From 4-1/2 in to 20 in outside diameter. The sizes ordered most often are 5-1/2 in in 15.50, 17.00, 20.00 and 23.00 lb/ft, 7 in in 23.00, 26.00, 29.00 and 32.00 lb/ft, and 9-5/8 in in 36.00, 40.00, 43.50 and 47.00 lb/ft. Lengths are R-1, R-2 or R-3. Intermediate walls and sizes above 13-3/8 in are supplied to order with a longer lead time.
5.How do I choose between N80-1 and N80Q?
Choose N80-1 for straight, moderate-pressure wells where no impact value is specified; it is normalized and costs less. Choose N80Q when the string will see pressure cycling, deviation, low temperature or a formal impact requirement, because it is quenched and tempered and every heat is impact tested. The mechanical minimums are identical, so the decision is about toughness and consistency, not strength.
6.Is N80 casing suitable for sour service?
No. N80 has no hardness ceiling and is not qualified to NACE MR0175 for sulfide stress cracking. For formation fluid containing H₂S, specify L80 (suitable up to moderate partial pressure), C90 or T95 depending on the partial pressure and temperature, and confirm the requirement with the well completion engineer.
7.What connections are available on N80 casing pipes?
STC (short round thread), LTC (long round thread) and BTC (buttress) are the API connections; BTC is the usual choice for heavy walls and gas wells. Premium connections with metal-to-metal seals are available on request for high-pressure gas, thermal or offshore service, normally with a 30-45 day lead time.
8.What is the price of API 5CT N80 casing pipe?
Indicative FOB China range is USD 950-1,300 per metric ton for PSL2 material, depending on diameter, wall, connection and quantity, with 5-1/2 in and 7 in at the lower end of the range and 13-3/8 in at the top. PSL1 is 2-4% cheaper, premium connections add 15-25%. A firm price is quoted against a complete specification.
9.What is the minimum order quantity and the lead time?
Minimum order is normally 20 metric tons per size, which is about one 20 ft container for casing up to 9-5/8 in. Standard weights ship in 7-15 days from stock or rolling, PSL2 with impact testing takes 20-30 days, and premium connections 30-45 days.
10.Which documents come with the shipment?
A mill certificate to EN 10204 3.1 covering heat analysis, tensile test, impact test where applicable, hydrostatic test and dimensional inspection; a packing list; and a certificate of origin. Third-party inspection by SGS, BV or Intertek, and the operator's own witness testing, can be arranged before shipment on request.
Hot Tags: api 5ct n80 casing pipes, China api 5ct n80 casing pipes manufacturers, suppliers, factory, api 5l line pipe for construction, api 5l pipe with good toughness, api 5l grade x80 pipe, api 5l pipe for natural gas transportation, api 5l pipe for pipeline construction, api 5l pipe with strict quality control
You Might Also Like
Send Inquiry














