ASTM A252 Spiral Welded Steel Pipe

gnee pipe team

The ASTM A252 specification is primarily for circular-section seamless steel pipes used in the manufacture of pipe piles, either as permanent load-bearing members or as casings for cast concrete piles. The wall thickness, length and diameter of these pipe piles are clearly specified to ensure that they meet various engineering requirements.
Pipe pile type:
The ASTM A252 specification primarily covers the following types of pipe piles:
Type 1: Spiral wound or straight seam welding, no additional requirements.
Type 2: Spiral wound or straight seam welding, requiring non-destructive testing of the weld inside or outside the pile.
This specification covers cylindrical nominal wall steel pipe piles, applicable to pipe piles in which the steel cylinder serves as a load-bearing member or as a shell forming the casing of a cast-in-place concrete pile. The diameter ranges from 219 mm to 3500 mm, and the single length can reach 35 meters.

Chemical Composition of A252 steel pipe

ASTM A252 Grade 3 Pipe Mechanical Properties

ASTM A252 construction hydraulic carbon spiral steel pipe

ASTM A252 Pipe
1. Type: A252 Pipe, A252 Pipe Piling
2. Application: Water pipe, Oil and Gas, Pipe Piles, Dredge Pipe, etc
3. OD: 6mm~80mm, WT: 0.7mm~30mm, L: 5m-48m or customized
4. Standard & Grade: ASTM A252
5. End: Plain end/Beveled ends, cut square, grooved, threaded and coupling, etc.

A252 pipe is a high-quality, high-performance steel pipe material that is widely used in petroleum, chemical industry, electric power, construction and other fields. It is especially suitable for occasions with high safety performance requirements.

Hot Tags: astm a252 spiral welded steel pipe, China astm a252 spiral welded steel pipe manufacturers, suppliers, factory, , , , , Galvanized Carbon Steel Pipe