Usually, pipe insulation uses secondary inorganic zinc primer (temperature resistance ≥ 400°C) anti-corrosion coating, and pipe ports are sealed with polyethylene film or three-layer PE cold tape to prevent water and moisture from entering before installation or during construction. Suitable for pipe insulation of hot water, high temperature, corrosive chemical pumps and oil pumps. The series of insulated pipe centrifugal pump products have the characteristics of high efficiency, low noise and reliable performance. The insulation material is wrapped with multiple layers of staggered seams to effectively reduce heat loss. At the same time, control measures are taken on the coating surface to prevent the occurrence of cold bridges, ensuring the temperature control of the anti-corrosion coating of the jacket. The aluminum foil reflective layer is wrapped with multiple layers of insulation material, effectively Reduce heat loss and make steam pipelines more economical and reasonable. Thermal insulation and anti-corrosion pipelines are corrosion-resistant steel materials with good thermal insulation properties. They are widely used in construction and promotion, and are constantly being improved and promoted. There are different types of processing methods for anti-corrosion and insulated pipes. Different processing methods determine that the pipes have different performance and functions, and the scope of use also changes.
Thermal insulation and anti-corrosion pipelines are corrosion-resistant steel materials with good thermal insulation properties. They are widely used in construction and promotion, and are constantly being improved and promoted.
