BS1139 Galvanized Scaffolding Steel Pipe
video

BS1139 Galvanized Scaffolding Steel Pipe

BS1139 standard galvanized scaffolding steel pipes are widely used in construction projects to build temporary structures such as scaffolding to provide support and passage for construction workers.
Send Inquiry
Chat Now
Product Introduction

BS1139 galvanized scaffolding steel pipe is the load-bearing tube at the core of tube-and-coupler scaffold systems used on UK, Middle East, African and Southeast Asian job sites. It is an electric-resistance-welded (ERW) carbon steel tube with a 48.3 mm outside diameter, hot-dip galvanized for corrosion resistance, and supplied to BS 1139 - the British standard that defines dimensions, material and finish for scaffold tube.

 

What BS1139 Defines

BS 1139 is the British Standard for metal scaffolding. For scaffolding tube it specifies a nominal outside diameter of 48.3 mm and common wall thicknesses of 3.2 mm or 4.0 mm. The steel must meet a minimum yield strength around 235 MPa, and the tube is normally hot-dip galvanized. In practice most export scaffold tube is also quoted to EN 39, the European equivalent, because the two standards share the same 48.3 mm diameter and are accepted interchangeably across most markets.

Contact us for price: sales@gneetube.com
 

Chemical Composition (EN 39 / BS 1139, S235GT)

Element

Max / Min

Note

C

≤ 0.20 %

-

Si

≤ 0.30 %

Keep ≤ 0.05 % for uniform hot-dip galvanizing

Mn

≤ 1.40 %

-

P

≤ 0.040 %

-

S

≤ 0.045 %

-

N

≤ 0.009 %

-

Al (total)

≥ 0.020 %

Required by EN 39 as grain refiner; not mandated by BS 1139

 

Mechanical Properties

Property

Requirement

Yield strength (ReH)

≥ 235 MPa

Tensile strength (Rm)

340–520 MPa

Elongation (A)

≥ 24 %

 

Specifications

Parameter

Value

Standard

BS 1139, EN 39

Outside diameter

48.3 mm (1.90 in), tolerance ± 0.5 mm

Wall thickness

3.2 mm / 4.0 mm (common); 1.8–4.0 mm available

Length

6.0 m / 6.4 m standard; 1–12 m on request

Steel grade

S235GT (EN 39), Q235, S275

Manufacturing

ERW, longitudinal high-frequency weld

Surface finish

Hot-dip galvanized (EN ISO 1461) or pre-galvanized

Zinc coating

HDG ≥ 420 g/m² (≈ 60 µm); pre-galvanized 60–120 g/m²

End finish

Square cut, deburred, PVC caps optional

 

BS1139 vs EN39

Aspect

BS 1139

EN 39

Origin

British standard, common in UK / Middle East / Africa / SE Asia

European standard, used across EU

Aluminum

Not specified

Al ≥ 0.020 % required (grain refinement)

Tolerances

Clear but more lenient

Stricter on straightness, roundness, weld

Galvanizing

HDG or other finishes allowed

Emphasizes HDG to EN ISO 1461

Certification

Flexible third-party acceptance

Often TÜV / SGS for EU use

Both standards specify the same 48.3 mm diameter, so a BS 1139 tube fits standard couplers and clamps in EN 39 systems.

 

Steel galvanized piping

Galvanised Steel Pipe

 

Material and Galvanizing

The tube is made from S235-grade carbon steel and formed by ERW welding, which gives a consistent seam and full-length straightness. For outdoor and marine use, hot-dip galvanizing to EN ISO 1461 applies a zinc layer of at least 420 g/m² that protects the steel by barrier and sacrificial action. Keeping silicon low (≤ 0.05 %) avoids the "sand-grain" reactive coating and gives a smoother, more uniform zinc skin. Pre-galvanized tube suits indoor or short-term use where coating thickness can be lower.

 

Typical Applications

Tube-and-coupler access scaffolds on building and infrastructure sites

Shoring, facade supports and temporary structural frames

Maintenance platforms around tanks, pipework and furnaces

Marine, offshore and ship-repair access where galvanized corrosion resistance matters

 

Ordering Checklist

Confirm standard: BS 1139, EN 39, or both.

Pick wall thickness: 3.2 mm for general use, 4.0 mm for heavy-duty posts and ledgers.

Specify length: 6.0 m standard, or cut lengths for system scaffolds.

Choose finish: HDG for outdoor/marine, pre-galvanized for indoor.

Request MTC showing chemistry and mechanicals (Si and Al values matter for galvanizing).

Confirm straightness and end finish: square cut, deburred, caps if needed.

 

Testing and Inspection

Mill test certificate (EN 10204) for chemistry and tensile; flattening test on welded tube; visual and dimensional check of OD, wall and straightness; zinc coating weight by gravimetric test; optional third-party inspection (SGS / TÜV / BV).

Contact now for MTC of BS1139 Galvanized Scaffolding Steel Pipe

 

Certificate

GNEE SGS Certificate
GNEE SGS Certificate

 

 

 

FAQ

What is the difference between BS1139 and EN39?

Both specify 48.3 mm scaffold tube, but EN 39 requires a minimum aluminum content (≥ 0.020 %) as a grain refiner and tighter tolerances on straightness, roundness and weld, while BS 1139 is more lenient and widely accepted in the Middle East, Africa and Asia. Either fits standard couplers.

 

Is BS1139 scaffold tube seamless or welded?

It is ERW welded tube with a longitudinal high-frequency seam. Seamless scaffold tube is uncommon; ERW gives consistent dimensions and lower cost.

 

What wall thickness should I choose, 3.2 mm or 4.0 mm?

Use 3.2 mm for general access scaffolds and ledgers. Choose 4.0 mm for vertical standards, heavy-duty shoring and load-bearing members.

 

Can BS1139 pipe be used for water or gas lines?

No. Scaffold tube is a structural member for temporary works, not a pressure pipe. For fluid delivery use a line-pipe grade such as API 5L or ASTM A53.

 

How thick is the galvanized layer?

Hot-dip galvanizing meets EN ISO 1461 at ≥ 420 g/m² (about 60 µm). Pre-galvanized tube carries 60–120 g/m² and suits indoor use.

 

Are you a manufacturer and can you customize?

Yes. We supply BS 1139 / EN 39 tube from mill stock and cut or thread to length on request; MTC and third-party inspection are available.

Hot Tags: bs1139 galvanized scaffolding steel pipe, China bs1139 galvanized scaffolding steel pipe manufacturers, suppliers, factory, Galvanized Carbon Steel Pipe, Galvanized Steel

Send Inquiry

whatsapp

Phone

E-mail

Inquiry